Step 1 - Start > Run type "rrasmgmt.msc"
Step 4 - Check on "VPN"
Step 7 - Select "Yes" to set the VPN Server to work with a RADIUS server
Step 8 - Type in the primary RADIUS server name (In this case it will be the NPS server) and create a shared secret.
Step 9 - Review and Finish the configuration.
Step 2 - Right click and Select as per below.
Step 3 - Select "Remote access (dial-up or VPN)
Step 4 - Check on "VPN"
Step 5 - Select as below to set your own IP Addresses.
Step 6 - Create the IP Address range.
Step 8 - Type in the primary RADIUS server name (In this case it will be the NPS server) and create a shared secret.
Step 9 - Review and Finish the configuration.
No comments:
Post a Comment